Road Surface Profiler (RSP)

Description


Pavement roughness, as the main factor of dynamic loads which from vehicle movement, can expedite deterioration of pavement as well as wear and tear of vehicles. By using RSP, the pavement roughness can be determined as IRI.

TBTPQL with different modular can be used to measure other parameters of pavement, such as SMTD/MPD, RUT etc. which our model TBTPQL-A/C/D can do.

TBTPQL series Road Surface Profiler(RSP) adopts laser sensor and accelerometer combination to measuring the longitudinal profile; It's a real time, continuous measuring device for collecting data of pavement condition.

It's a real time continuous measuring device which installed in the front of vehicle, easy installation and operation;

TBTPQL Series Road Surface Profiler(RSP) can be equipped together with devices to realize the measurement for road damage such as crack detection(LCMS).

This machine is widely used for inspect the quality of highway, pavement, airport run way etc.


TBTPQL series Road Surface Profiler(RSP) adopts laser sensor and accelerometer combination to measuring the longitudinal profile; It's a real time, continuous measuring device for collecting data of pavement condition.


Besides IRI, RSP with different modular can be used to measure other parameters of pavement, such as SMTD/MPD, RUT etc. which our model TBTPQL-A/C/D can do.


It's a real time continuous measuring device which installed in the front of vehicle, easy installation and operation;



TBTPQL Series Road Surface Profiler(RSP) can be equipped together with devices to realize the measurement for road damage such as crack detection(LCMS).



Features

1. Modular system, easy for maintenance;

2. Real-time data collection for IRI, σ, RN, RQI, SMTD/MPD, RUT, speed etc.

3. Testing at traffic speed enables faster measuring and saving time;

4. Real time graph display;

5. Adopts imported sensor and accelerometer

6. Cover lane width of 3500mm

7. Accords to ASTM E950 Class 1 profiling;

8. Adapt to third party analysis software such as ProVal

9. With GPS built-in, get coordinate in real time(for model TBTPQL-A/D/F)

10.With DMI installed on rear wheel, easy for surveying the distance;

11. Laser sensor can be extended up to 17pcs and min. to 7pcs.


Specification

No.

Description

Specification

1

Testing project

IRI, RN, SMTD(MPD)

2

Laser(IRI/RUT)

Riftek (from Republic of Belarus)


IRI Laser model no.

RF603 125/500

RUT laser model no.

RF603 245/1000

Frequency

9.4kHz

Ground clearance

375/745mm

Measuring range

±250/500mm

Resolution

<0.05mm

Protection level

IP 67

Accuracy

<0.5mm

3

SMTD laser

KEYENCE


Laser model

LK-G400

Ground clearance

400mm

Respond frequency

20kHZ

Measuring range

±100mm

Resolution

0.05mm

Protection level

IP 67

Linearity

±0.1% F.S.

4

Communication

Ethernet interface

5

Acceleration sensor

Lance (USA)


Measuring range

±10g

Resolution

0.00008g

Frequency

0.7~7700Hz

6

Distance sensor

OMRON


Pulse count

2000pulse/turn

Protection level

IP54

Measuring accuracy

±0.5m/km

7

Sampling interval

≥1mm

8

Vertical section testing accuracy

<0.5mm

9

Vertical section wavelength

1mm~200m

10

IRI range

0~20m/km

11

IRI resolution

0.1m/km

12

SMTD resolution

0.01mm

13

SMTD accuracy

0.05mm

14

Wheel track testing range

0~200mm

15

Wheel track testing resolution

0.1mm

16

Cross section lane width

3500mm

17

Size

Basic part: 1.6m

Removable part: 164mm

18

Testing speed



IRI

0~100km/h

SMTD

0~70km/h

Wheel track

0~70km/h


Standard Configure

A.  Main Unit (TBTPQL Series) ---we support customized modular, such as, 7pcs, 11pcs;

*A-1 TBTPQL-A: 13pcs laser sensor (dual IRI/ dual SMTD / RUT)

A-2 TBTPQL-B: 1pc laser sensor(single IRI)

*A-3 TBTPQL-C: 1pc laser sensor(single IRI/ single SMTD)

*A-4 TBTPQL-D: 2pcs laser sensor(dual IRI/single SMTD)

A-5 TBTPQL-E: 2pcs laser sensor(dual IRI + dual SMTD)

*A-6 TBTPQL-G: 2pcs laser sensor (dual IRI)

    *  means popular selling items

B.  Laptop (Lenovo brand / with data acquisition software installed and calibration data)

C.  Calibrating Block

D.  DMI with cable

E.  Tool Box

F.Spare Parts

G.Refit Accessories (for tractor modification)


LEAVE A MESSAGE

Continuous Friction Coefficient Tester

Falling Weight Deflectometer FWD